Onsite Water Analysis Kit

The current practice for testing water is to either: test for pH and alkalinity in the field and then ship preserved and unpreserved samples to a laboratory; or conduct all of the tests using legacy field methods. By the time the sample arrives at the lab, it is too late, and legacy field methods are typically inaccurate when testing oilfield waters. Additionally, most companies are ultimately paying for two tests; one in the field, one in the lab.

Water quality changes in just a few hours

When the pressure and temperature change after taking a sample, many critical parameters change rapidly.

  1. Cations and anions start forming insoluble scales (“crashing out”)

  2. Dissolved gases (such as CO2 and H2S) start off-gassing

  3. Undissolved gases from the air are absorbed by the sample

  4. All of these are factors cause pH to fluctuate unpredictably

  5. Acid preserving the sample is often not enough

 

The current practice for testing water is to test for pH and alkalinity and ship preserved and unpreserved samples to a laboratory. By the time the sample arrives at the laboratory, it is too late. Additionally, most companies are paying for two tests; one in the field, one in the lab. 

Our Solution:

10 Minutes, 1 Field Test, 1 Low Price

The Water Lens system is an accurate, simple, and cost-effective way to determine a multitude of water quality parameters in a matter of minutes, whether in the field or in a lab. The system is design to suit complex waters, and because of this robustness, the system works in any water-intensive industry, such as Oil & Gas, Desalination, Power Generation, Wastewater Treatment, Agriculture and Paper Mills. The data generated by the Water Lens system  provides our customers with timely, consistent, reliable, and actionable information that can be used throughout your operations.

TIME LINE – THE WATER LENS SYSTEM VS LABS

7 REASONS WHY YOU SHOULD USE WATER LENS

Fast & Accurate- Lab-quality results injust 10 minutes.


Safe- No toxic chemicals or acids.


Easy to use- No chemist or trained technician required.


Saves Money- Less expensive than traditional lab analyses, eliminates sample transport costs, helps to optimize chemical additives, and reduce downtime.

 

Enables real-time decisions and diagnostics in the field by providing consistent, reliable and actionable data.

 

Identify problems before catastrophic fluid failures occur.

 

Test 26 parameters simultaneously.

Trays are configurable to meet your specific water testing needs.